Over the past five years, front loading washing machines have gained some serious momentum in the United States. They are designed for high efficiency operation while using low energy. Although a great eco-friendly concept, there is a down side to this energy-saving washer model - mold & mildew build-up and unpleasant odors. Once present, these issues can be quite difficult to resolve.After my laundry post, a reader asked how to get rid of that moldy smell emitting from her washer. If you have a front loader, you too may be experiencing the same thing. Before I give you the mold prevention tips, I think it's first important to identify the source of the problem. Unfortunately the main source of the problem is most likely your washing habits. Do you leave wet loads sitting overnight? How full do you pack your washer? Do you always shut the door? Do you run a cleaning cycle? A musty smell is caused by a build-up of interior mold. Mold that can be prevented if you're willing to change up your washing routine.
Solutions to prevent mold and mildew:
1) Switch to using only an HE (high efficiency) detergent. In doing my research most would agree POWDER is best. Standard detergent produces more suds than high efficiency detergents, and suds decrease the efficacy of the washer's drainage system. This creates the humid environment mold needs.
2) Use less than the recommended detergent level for your load and do not overload your washer. Too much detergent can cause a residue build-up. Experiment until you find a minimum measurement that delivers a clean wash. This is also a money saver.

3) Stop using liquid fabric softener and switch to fabric softener sheets in the dryer. Liquid fabric softener leaves a residue on which odor-causing mold and mildew may grow; sheets do not.
4) Occasionally wash some loads such as whites, linen and towels in hot water to help flush out wash residue. The warm water kills off the bacteria.
5) Clean out the basin and rubber seal. First wipe the inside of the washer, especially the area where the door seals to the inside. Mold can collect around the insides and folds of the rubber seals. Get in there and make sure you cleaned it all. You could use bleach, Simple Green, Vinegar or Pinesol. Make sure to pull back the gasket/rubber seal just inside the door opening and remove any visible debris. Last week I found a disgusting black, gooey layer that had built-up in no time along with a lost sock and clumps of hair. Eww.
6) Leave the door and dispenser slightly ajar between wash loads. This will decrease the mold build-up as it allows the tub to dry completely. The increased air circulation will help to dispel humid air in the washer cavity.8) If you notice a pool of water inside the basin after you take out the wet load, use a rag or paper towel to soak up any left over water. The washer's horizontal-oriented wash tub has a tendency to leave water within the appliance.
9) Run the front-loading washer's self-cleaning cycle, if the washer model includes this feature, every four weeks. The cleaning cycle circulates hot water through the washer's system and helps clean its tubing and drainage outlets, where material that can contribute to odors collects.
10) If washer does not have a self-cleaning cycle, use vinegar to clean the washer every four weeks or sooner. Add 2 to 3 cups of plain white vinegar to your washer's dispenser cup. Run a hot water cycle. The white vinegar sterilizes and cleans the washer, neutralizing odors along the way.
*NOTE: IF YOU FOLLOW THESE STEPS, IT WILL TAKE 2-3 WASHINGS TO TOTALLY RID THE WASHER OF THIS MUSTY SMELL.











In my efforts to give back, every time you make a purchase through our website, Piper Designs will make a donation on your behalf to 
















What's even more spectacular about this company is that they plant a tree in your honor for EVERY order and all their cards and envelopes are 100% post-consumer recycled. Love that. They are packed inside a die-cut box made from 100% recycled materials as well. Thoroughly 






2) 

No one was able to reach us all day. And, we were OKAY.
Over the holidays, I received an unexpected Happy Holidays card in the mail from
Alright - moving on to plan B. I held up a pair of Tory's classic ballerina flats. Ya know, the ones every girl has but me. His face went sour within a blink of an eye and I heard the broken record once again - "No flats Hail. Those are ugly and flats on chicks look awful..."
Alright - plan C. I start to get frustrated, Chase, with a pair of sunglasses strapped to his face, is pulling handbags off the wall, and Dave has the typical "I want to go, I've had enough shopping" body language. In my defense, we'd only been in the store 20 min. Max. So we leave. With nothing...
The moral of the story and why this tickles my fancy - Yes, I went through a painful process to only get a pair of slippers but I made my husband happy, I found a deal, and they are super comfy. All in all, {free} money well spent!